1/26/2009
We don't have a lot of time to waste. With a global economy in free fall, and facing the double barrels of Peak Oil and Climate Change, I thought I'd start a thread on Radical Recycling. We have to start using all our tools, and since Billy has given us this nice place (a tool) to put ideas up on I'm hoping you can build on some of my ideas and enlarge this concept of radical recycling/re-use.
I've written about some of this stuff before, and you can find more on my site
www.votebergland.org, and the old website
www.NNEMA.org. Please ignore the political stuff on these pages, I lost the last two elections and am no longer a candidate, but am keeping the sites up and running because there has been some traffic on it, especially from overseas.
Obviously I'm a Peak Oil Doomer, and became more so after reading Kunstler's "The Long Emergency".
I've also got some posts on two of the Peak Oil sites,
www.theoildrum.com, and
www.doomers.us. They're very educational sites, and my few posts on there are under the names renofreepress, and renobergie, respectively. I hope you have time to browse these great websites. Of course I hope to participate more fully now in our very own washoegreens webpage. Good job Billy, thanks!
As I see it we've passed the Golden Age of America and are now on the decline. On one hand it may be a good thing because we'll be trashing the planet less, and be forced to use our very creative minds to adapt to the new age. On the other hand it is going to be very hard for many of us to adapt to new conditions. Our salvation may the electronic communications and our togetherness.
So anyway, my recent efforts have been towards re-using tin cans.
My favorites are the Carnation Evaporated Milk cans, and that's because they are nestable, (explain later), tho' any tin cans will work for most of these projects.
Cans for cookers.
The first can-cooker I built was a Rocket stove. Do a search on internet for more details.
Here's a pic, and the advantages are that the firebox is doubled (thus insulated) allowing more heat to be captured. It works OK and allows continuous feed of wood, but I like the wood-gas stoves better.

Wood Gas stoves are my favorites. Do a search on how to build, they're pretty easy and do produce a real nice flame.

I've also designed one for wood-pellets (it'll use twigs, too). The difference between mine and others is in the placement of the air intake holes.
Generally holes are evenly distributed over the bottom and lower 1/3 of the can. Mine however leaves the center of the bottom edge without holes.

This allows IMHO a full burn around the perimeter, and an unburnt source in the middle which feeds the fire longer. Don't know if that's actually true, but it seems so.
Also I made the addition of a large hole midway up which is used for lighting the thing, and also seems to provide extra air to allow the unburnt gasses to vortex before hitting the top combustion holes.

Test results so far are that it will burn 4 oz of pellets for 20 minutes. After starting it it is relatively smoke free, and you get a little smoke only after 20 minutes when the flames start to go out. It will stay hot for another 20 minutes. Not bad for 4 oz of fuel.
I'm currently designing a series of Food Tubes for my disaster preparedness efforts. A good idea for us all to think about. Check the blog on my site for Bug Out Tubes for more info and uses of tin cans.
These Bug Out Tubes provide a portable stash of foods and also you can make stuff from the cans.
You can cook in them
You can eat from them
Make stoves
Filter water
Sprout seeds
Make heat tubes
etc. etc.
Rather than use cans just for survival kits, they also make great solar hot air collectors.
Here's one I made for our house. In theory it will kick out about 1KW of heat on a sunny day. More if it were to track the sun, but that's another project. It was made using scrap glass, wood and a can of black spray paint. It'll reach over 180 degrees (more if fine tuned) and also I used it last year to dehydrate tomatoes from the garden.


I'm also building one from aluminum beer cans and will post if there is interest on how to make one.
Well, that's it for this post. I hope you get some ideas from it for Radical Recycling, and will add to our group knowledge.
Thanks,
Craig